Personal Protective Equipment and Clothing Specialists

3M™ Full Face Mask Replacement Filters 6098

3m half and full face mask replacement filters 6098 2

The 3M™ Gas and Vapour filter 6098, AXP3 can be used where protection against low boiling point (<650 C) organic compounds and particulates is required. It is designed to be used with 3M Full Face respirators only.
Product Details
Additional Information
Reviews

Description

The 3M™ Gas and Vapour Filter 6098 contains activated carbon and conforms to EN 14387. It is designed to be used with 3M Full Face respirators only. The filter can provide protection against low boiling point (<650 C) organic compounds and particulates.

Main Features
  • Good balance of weight on face.
  • Excellent field of vision as a result of unique trapezoidal shape.
  • Bayonet fitting ensures precise & safer locking to 3M Full Face respirators.
Applications

3M™ Gas and Vapour Cartridge 6098 is a unique filter cartridge that is able to offer protection from low boiling point (<650 C) organic vapors as well as solid particulate contaminants such as dust, oil mist, and metal fumes. The high-efficiency P3 Particle Filter built into this product is designed for a maximum length of service and ease of maintenance. They can be installed easily, with one person, in less than five minutes!

Storage and Transportation.

Do not store outside the temperature range -10°C to +50°C or with humidity above 90%. When stored as stated, the expected shelf life of the product is 5 years from the date of manufacture. The end of shelf life (use-by) date is marked on the product and packaging. The original packaging is suitable for transporting the product. Better still, 3M assigns a unique part number on each unit, so when the gas- and vapor-tight package is penetrated, its contents are tracked back to an individual part number. That’s only one more way 3M helps you get it right – from first use to the final disposal.

Warnings and Use limitations.

Limitations on the use of these filters may differ among countries. 3M recommends the following should be applied in the absence of specific recommendations in South Africa.

Low boiling point organic compounds against which the 3M™ Gas and Vapour filter 6098, AXP3 may be used are divided into groups:

 

GroupMaximum Concentration (ppm)Maximum Usage Time (minutes)
Group1100 ppm40 mins
Group 1500 ppm20 mins
Group 21000 ppm60 mins
Group 25000 ppm20 mins

 

Proper selection, training, use, and appropriate maintenance are essential in order for the product to help protect the wearer from certain airborne contaminants.

Failure to follow all instructions on the use of these respiratory protection products and/or failure to properly wear the complete product during all periods of exposure may adversely affect the wearer’s health, lead to severe or life-threatening illness or permanent disability.

 

Always be sure that the complete product is:
  • Suitable for the application;
  • Fitted correctly;
  • Worn during all periods of exposure;
  • Replaced when necessary.

For suitability and proper use follow local regulations, refer to all information supplied or contact an occupational hygienist, safety professional, or 3M representative on the Tech Assist Helpline.

  • Do not submerge the filters in liquid.
  • Do not use these products inflammable or explosive atmospheres.
  • Do not use in atmospheres containing less than 19.5% oxygen. (3M definition. Individual countries may apply their own limits on oxygen deficiency. Seek advice if in doubt).
  • Do not use for respiratory protection against atmospheric contaminants/concentrations which have poor warning properties or are unknown or immediately dangerous to life and health (IDLH) or against contaminants/concentrations which generate high heats of reaction with chemical filters.
  • Do not use these products when working with open flames or liquid metal droplets.
  • Do not use these products in pure oxygen or oxygen-enriched atmospheres.
  • Do not use in concentrations above those specified in Warning and Use Limitations.
  • In case of intended use in explosive atmospheres, contact 3M Technical Service.
  • Leave the contaminated area immediately if:
    a) Any part of the system becomes damaged.
    b) Airflow to the facepiece decreases or stops.
    c) Breathing becomes difficult or increased breathing resistance occurs.
    d) Dizziness or other distress occurs.
    e) You smell or taste contaminants or irritation occurs.
  • Never alter, modify or repair this device.
  • These products do not contain components made from natural rubber latex.

Additional information

Reviews

There are no reviews yet.

Be the first to review “3M™ Full Face Mask Replacement Filters 6098”

Your email address will not be published. Required fields are marked *

Copyright © Yasuke Safety 2024. All Rights Reserved.
magnifiercross